ChinaAutoRegs｜GB 20890-2007 英文版/English/翻译/重型汽车排气污染物排放控制系统 耐久性要求及试验方法
Test Procedures and Requirement of Durability of Emission Control Systems for Heavy-duty Vehicles
1. SCOPE
This Standard stipulates the test procedures and durability requirements of emission control systems for heavy-duty vehicles.
The Standard applies to the durability tests of emission control systems for the type approval test and production conformity inspection of Category M2, M3, N2 and N3 motor vehicles fitted with exhaust after-treatment devices and at a designated speed of more than 25 km/h, as well as Category M1 motor vehicles with a total mass greater than 3,500 kg.
When the type approval test and the production conformity inspection in accordance with GB 14762-2002, Phase II of GB 17691-2001 and Phase III of GB 17691-2005 are carried out on motor vehicles fitted with exhaust after-treatment devices, they should also meet the durability requirements of emission control systems stipulated in the Standard:
The Standard can be executed using the exhaust after-treatment device, which uses a variety of independent techniques to carry out the type approval test.
2. NORMATIVE REFERENCES
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. At the time this standard is published, all the applicable standards are valid. All the standards are subject to subsequent amendments, parties using these standards are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below.
GB 14762-2002 Emission limits and measurement methods for exhaust pollutants from positive ignition (P.I.) engines of vehicles and vehicles equipped with P.I. engines.
GB 17691-2001 Emission limits and measurement methods for exhaust pollutants from vehicle compression-ignition engines
GB 17691-2005 Emission limits and measurement methods for exhaust pollutants from vehicle compression-ignition, gas fuelled ignition engines (China Phases III, IV, V)
GB 17930 Unleaded petrol (gasoline) for motor vehicles
GB 18047-2000 Compressed natural gas as vehicle fuel
GB 19159-2003 Automotive liquefied petroleum gas
GB/T 5181-2001 Automotive emission − Terms and definitions
GB/T 12548-1990 Motor vehicles − Speedometer and odometer − Calibration method
GB/T 12534-1990 Motor vehicle − General rules of the road test method
GB/T 12678-1990 Reliability running test method for automobiles
GB/T 12679-1990 Motor vehicles − Durability running − Test method
GB/T 15089-2001 Classification of power-driven vehicles and trailers
GB/T 18297-2001 Performance test code for road vehicle engines
GB/T 19055-2003 Reliability test methods for motor vehicle engines
GB/T 19147-2003 Automobile diesel fuels
***********************************************
现成译文，到款即发。
任取样页验证译文质量。
免费提供正规增值税发票。
请联系手机/微信: 133-0649-6964/Email: standardtrans@foxmail.com 购买完整译文。
专业源于专注|舍吾予言标准翻译/ChinaAutoRegs/始终专注于机动车标准翻译！迄今为止已翻译上千个国内外汽车法规标准！独家打造千万级汽车专业术语库和记忆库。