ChinaAutoRegs｜GB/T 14951-2007英文版翻译 汽车节油技术评定方法
Measurement method of fuel saving technology for automobiles
1 Scope
This standard specifies the evaluation indicators and test methods of fuel saving technologies for in-use vehicles, as well as test data processing and calculations of evaluation items.
This standard is applicable to the evaluation on service effects of various fuel saving technologies for in-use vehicles.
2 Normative References
The following standards contain provisions which, through reference in this text, constitute provisions of this standard. For dated references, subsequent amendments (corrigenda excluded) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. For undated references, the latest edition of the normative documents referred to applies.
GB/T 265 Petroleum products – Determination of kinematic viscosity and calculation of dynamic viscosity
GB/T 3142 Lubricants – Determination of load carrying capacity (four balls method)
GB/T 3535 Petroleum oils – Determination of pour point (GB/T 3535-1983, neq ISO 3016:1974)
GB/T 3536 Petroleum products – Determination of flash and fire points – Cleveland open cup method (GB/T 3536-1983, eqv ISO 2592:1973)
GB 3847 Limits and measurement methods for exhaust smoke from C.I.E. (Compression Ignition Engine) and vehicle equipped with C.I.E.
GB/T 5096 Petroleum products – Corrosiveness to copper – Copper strip test (GB/T 5096-1983, eqv ASTM D 130:1983))
GB/T 12534 Motor vehicles－General rules of road test method
GB/T 12543 Motor vehicles－Acceleration performance－Test method
GB/T 12545.2 Commercial Vehicle-Fuel consumption test method
GB 18285 Limits and measurement methods for exhaust pollutants from vehicles equipped ignition engine under two-speed idle conditions and simple driving mode conditions
GB/T 18297 Performance test code for road vehicle engines (GB/T 18297-2001, neq ISO 1585:1992, ISO 2534:1998)
GB 18352 (All parts) Limits and measurement methods for emissions from light-duty vehicles
3 Terms and Definitions
For the purpose of this document, the following terms and definitions apply.
3.1
fuel saving technologies for automobile
technologies that not only reduce the automobile fuel consumption but also have no adverse effect on other operation performance
***********************************************
现成译文，到款即发。
任取样页验证译文质量。
免费提供正规增值税发票。
请联系手机/微信: 133-0649-6964/Email: standardtrans@foxmail.com 购买完整译文。
专业源于专注|舍吾予言标准翻译/ChinaAutoRegs/始终专注于机动车标准翻译！迄今为止已翻译上千个国内外汽车法规标准！独家打造千万级汽车专业术语库和记忆库。