ChinaAutoRegs|GB/T 20042.2-2008 英文版 质子交换膜燃料电池 电池堆通用技术条件
Proton Exchange Membrane Fuel Cell – General Technical Specification of Fuel Cell Stacks
1 SCOPE
This Part of GB/T 20042 specifies the basic requirements for safety and performance of proton exchange membrane fuel cell stacks (including direct alcohol fuel cell stacks), and the requirements for type inspection and routine inspection items, test methods, and markings and instructions.
This Part is applicable to proton exchange membrane fuel cell stacks (including direct alcohol fuel cell stacks) (hereinafter referred to as “fuel cell stacks”).
This Part deals with conditions that can yield hazards to persons and damage outside the fuel cell stacks only. Protection against damage to the fuel cell stack internals is not addressed in this Part, provided it does not lead to hazards outside the module.
This Part does not cover the storage devices of fuel and oxidant or the delivery process and devices of fuel and oxidant.
Alternatively, any other fuel cell stacks, which employ better materials or have new structures, and which can pass the inspections specified in this Part and meet the relevant requirements, may also be considered to comply with this Part.
2 NORMATIVE REFERENCES
The following standards contain provisions which, through reference in this Part, constitute provisions of this Part. For dated reference, subsequent amendments to (excluding corrections to), or revisions of, any of these publications do not apply. However, all parties coming to an agreement based on this Part are encouraged to investigate the possibility of applying the latest editions of the standards. For undated references, the latest edition of the normative document referred to applies.
GB/T 2423.10 Environmental testing for electric and electronic products – Part 2: Test methods Test Fc and guidance: Vibration (Sinusoidal) (GB/T 2423.10-2008, IEC 60068-2-6: 1995, IDT)
GB/T 2423.55 Environmental testing for electric and electronic products – Part 2 : Test methods – Test Eh: hammer tests (GB/T 2423.55-2006, IEC 60068-2-75：1997, IDT)
GB/T 3512 Rubber, vulcanized or thermoplastic -Accelerated ageing and heat resistance tests – Air-oven method (GB/T 3512-2001, eqv ISO 188: 1998)
GB 3836 (all parts) Electrical apparatus for explosive atmosphere (IEC 60079 all parts)
GB 4208 Degrees of protection provided by enclosure(IP code) (GB 4208-2008, IEC 60529: 2001, IDT)
GB 4943 Safety of information technology equipment (GB 4943-2001, IEC 60950-1: 1999, IDT)
GB/T 5095.8 Electromechanical components for electronic equipment-Basic testing procedures and measuring methods – Part 8: Connector tests (mechanical) and mechanical tests on contacts and terminations (GB/T 5095.8-1997, IEC 60512-8: 1993, IDT)
GB/T 5169 Fire hazard testing for electric and electronic products (IEC 60695)
GB/T 5563 Rubber and plastics hoses and hose assemblies – Hydrostatic testing (GB/T 5563-2006, ISO 1402: 1994, IDT)
GB/T 7826 Analysis techniques for system reliability; Procedure for failure mode and effects analysis(FMEA) (GB/T 7826-1987, idt IEC 60812: 1985)
GB/T 7829 Procedure for fault tree analysis (GB/T 829-1987, neq IEC 60056)
GB/T 15329.1 Rubber hoses and hose assemblies-Textile-reinforced hydraulic types-Specification – Part 1: Oil-based fluid applications (GB/T 15329.1-2003, ISO 4079-1: 2001, MOD)
GB/T 18290 (all parts) Solderless connections (idt IEC 60352 all parts)
GB/T 20042.1 Proton exchange membrane fuel cell-Terminology
IEC 61508 (all parts) Functional safety of electrical/electronic/programmable electronic safety-related systems
ISO 37 Rubber, vulcanized or thermoplastic – determination of tensile stress-strain properties
ISO 1307 Rubber and plastics hoses for general-purpose in industrial applications – Bore diameters and tolerances, and tolerances on length
ISO 4672 Rubber and plastics hoses – Sub-ambient temperature flexibility tests
EN 50178 Electronic equipment for use in power installations
3 TERMS AND DEFINITIONS
For the purpose of this part, the terms defined in GB/T 2900.18, GB 3836.1, GB 4943 and GB/T 20042.1 apply.
4 REQUIREMENTS
To facilitate communications on manufacture and application of fuel cell, this Part includes an informative Annex A for the reference of interested parities.
1、现成译文，到款即发。
2、下单前可任取样页验证译文质量。
3、免费提供正规普通增值税数电发票。
4、请联系手机/微信: 13306496964/Email: standardtrans@foxmail.com 获取完整译文。
5、本英文译本为纯人工专业精翻版本，保证语法术语准确率和专业度！
6、专业源于专注|ChinaAutoRegs 始终专注于汽车标准翻译领域！
7、「中国汽车标准译文库」已收录上千个现行汽车国家标准和行业标准的英文版译本，涵盖传统燃油车、新能源汽车和摩托车标准化体系！独家打造千万级汽车专业术语库和记忆库。
1. The English Translation of this document (GB, GB/T, QC/T, CNCA, CQC, CAV, etc.) is readily available, and delivered immediately upon payment.
2. You may request for sample pages to your preference before placing an order.
3. Please contact standardtrans@foxmail.com for the complete PDF version in English.
4. Almost all of Chinese automotive/automobile standards, regulations and norms in effect have been included in our well-established database, providing one-stop, up-to-date, efficient and professional solution.