ChinaAutoRegs｜GB/T 34215-2017英文版/English/翻译/电动汽车驱动电机用冷轧无取向电工钢带（片）
Cold-rolled non-oriented electrical steel strip(sheet) for electric vehicle driving motor
1 Scope
This standard specifies the terms and definitions, symbols and designations, general requirements, technical requirements, inspection and test, re-inspection and judgment rules as well as packaging, marking, quality certificate and order contents of cold-rolled grain non-oriented electrical steel strip (sheet).
This standard is applicable to cold-rolled grain non-oriented electrical steel strips (sheets) [hereinafter referred to as “steel strips (sheets)”] with nominal thicknesses of 0.20mm, 0.27mm, 0.30mm and 0.35mm used for making driving motors of electric vehicle.
2 Normative references
The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.
GB/T 228.1-2010 Metallic materials – Tensile testing – Part 1: Method of test at room temperature
GB/T 228.2-2015 Metallic materials – Tensile testing – Part 2: Method of test at elevated temperature
GB/T 247 General rule of package, mark and certification for steel plates (sheets) and strips
GB/T 2521.1-2016 Cold-rolled electrical steel delivered in the fully-processed state – Part 1: Grain non-oriented steel strip (sheet)
GB/T 2522 Methods of test for the determination of surface insulation resistance and lamination factor of electric sheet and strip
GB/T 2900.60 Electrotechnical terminology – Electromagnetism
GB/T 3655 Methods of measurement of the magnetic properties of electrical steel sheet and strip by means of an Epstein frame
GB/T 9637 Electrotechnical terminology – Magnetic materials and components
GB/T 17505 Steel and steel products – General technical delivery requirements
GB/T 18253 Steel and steel products – Types of inspection documents
GB/T 19289 Methods of measurement of density, resistivity and stacking factor of electrical steel sheet and strip
YB/T 4292 Methods of determination of the geometrical characteristics of electric steel sheet and strip
3 Terms and definitions
For the purposes of this document, the terms and definitions given in GB/T 2900.60, GB/T 9637 and GB/T 2521.1-2016 apply.
***********************************************
现成译文，到款即发。
任取样页验证译文质量。
免费提供正规增值税发票。
提供WORD/PDF版本，可自行编辑！
请联系 手机/微信: 133-0649-6964/Email: standardtrans@foxmail.com/QQ: 564965870 购买完整译文。
专业源于专注|舍吾予言标准翻译[ChinaAutoRegs]深耕于机动车标准翻译！迄今为止已翻译上千个国内外汽车法规标准！独家打造千万级汽车专业术语库和记忆库。