ChinaAutoRegs｜GB/T 5470-2008 英文版/English/翻译/塑料 冲击法脆化温度的测定
Plastics – Determination of the Brittleness Temperature by Impact
1 SCOPE
This Standard specifies a method for determining the temperature at which plastics that are not rigid at normal ambient temperature exhibit brittle failure under specified impact conditions. Two test methods are specified depending on different test machines and specimens:
A method: Type A test machine and Type A test specimen;
B method: Type B test machine and Type B test specimen.
This standard utilizes a statistical technique to obtain the brittleness temperature. Provisions are made for the testing of sufficient specimens to permit the calculation of the brittleness temperature on a statistical basis. Statistical techniques have been developed to quantify the brittleness temperature as is defined in 3.1.
This standard establishes the temperature at which there is a 50% chance of failure in specimens. This standard is relatively useful for formulating material specifications, although it does not necessarily measure the lowest temperature at which the material may be used. The precision of the measurement shall not exceed 5°C when establishing material specifications.
2 NORMATIVE REFERENCES
The following standards contain provisions which through reference in this text, constitute provisions of this Standard. For dated references, subsequent amendments (corrigenda excluded) to, or revisions of, any of these publications do not apply. However, parties to agreements based on this Standard are encouraged to investigate the possibility of applying the most recent editions of the Standards indicated below. For undated references, the latest edition of the applicable Standards referred to apply.
GB/T 2918-1998 Plastics–Standard atmospheres for conditioning and testing (ISO 291: 1997, IDT)
GB/T 11547-2008 Plastic – Methods of test for the determination of the effects of immersion in liquid chemicals (ISO 175:1999, MOD)
ASTM D746:2007 Standard Test Method for Brittleness Temperature of Plastics and Elastomers by Impact
***********************************************
现成译文，到款即发。
支持样页验证质量。免费提供增值税发票。
请联系 QQ: 564965870/微信: 13306496964/Email: standardtrans@foxmail.com 购买完整译文(PDF/Word)。
专业源于专注|ChinaAutoRegs 始终专注于机动车标准翻译！迄今为止已翻译上千个国内外汽车法规标准！独家打造千万级汽车专业术语库和记忆库。